Emptying The Drum; Emptying Dust Drum; Blowing Feature - RIDGID WD4071MRT0 Manual Del Usuario

Operation (continued)

Emptying the Drum

WARNING:
To reduce the risk of injury from
accidental starting, unplug power
cord before emptying the drum.
1. To remove the Powerhead to empty
contents of the Dust Drum, simply lift
the two Drum Latches on the side of
the Vac and lift the Powerhead up and
off the dust drum and set to the side.
2. Lay the Powerhead upside down on
a clean dry area while emptying the
Drum or changing the Filter.
3. Dump the Drum contents into the
proper waste disposal container.
SP7046-2 WD4071MRT0 04092019.indd 19

Blowing Feature

Your Wet/Dry Vac has the capability
to be used as a Blower for yard work,
patio cleanup and workshop applications
to blow sawdust and other debris.
Always
complying with ANSI Z87.1 (or in
Canada, CSA Z94.3) before using as
a blower.
To reduce the risk of injury to
bystanders, keep them clear of
blowing debris.
Powerhead
Power
Head
Dust
Dust
Wear a dust mask if blowing creates
Drum
Drum
dust which might be inhaled.
Drum
Latch
Drum
Latch
To reduce the risk of hearing damage,
wear ear protectors when using the
Vac/Blower for extended time or in a
noisy area.
19
WARNING:
wear safety
WARNING:
CAUTION:
CAUTION:
eyewear
4/9/19 10:45 AM