How To Use The Pyro-Clean Program - De Dietrich DOP499 Serie Instrucciones De Uso

99634051_ML_A.qxd 18/05/04
H
ow to use the pyro-clean program
1) Carrying out an immediate pyrolysis cleaning session
a) Remove any accessories from the oven and wipe off any excess grime.
b) Check that the programmer displays normal time and that it is not flashing.
c) Press the program selection touch control
until the "Pyro-clean" program appears.
Your oven has 3 pyrolysis symbols
correspond to 1 two-hour pyro (Non-adjustable).
You can select the two other cycles (
1h45,
pressing the - or +.
The oven cannot be used for 2h, 2h 15 or 2h
30. These times allow for cooling down until
the door is automatically unlocked.
d) Press the START/STOP touch control
ning (after about 2 minutes).
for the pyro-clean cycle by pressing touch control
symbol remains lit until the door is automatically unlocked.
e) Stop the oven by pressing the START/STOP touch control
f) Use a damp cloth for removing the white ash after the oven has cooled down.
The oven is now ready for use.
Note: The pyro-cleaning temperature cannot be altered. During the cleaning cycle the light
is switched off. If your oven is still not clean after pyro-cleaning you have delayed cleaning
too long. Repeat the pyro-clean program.
Never hang household linen (towels, dishcloths, etc.) on the oven door
handle.
During the cleaning cycle accessible surfaces become much hotter than
during normal cooking. Keep children at a distance.
13:06 Page 41
or 1h30) non-adjustable, by
- The door is locked during pyro-clea-
- You can consult the finishing time
that
START
STOP
START
STOP
START
STOP
. At the end of pyro-cleaning the
GB
41