TROUBLESHOOTING
Please make these simple checks before calling service. These tips may save
you time and money since charges for receiver installation and adjustments of
customer controls are not covered under your warranty.
Symptoms
"Ghost" or double image
No power
No picture
Good picture but no
sound
Good sound but poor
color
Poor picture
Snowy picture and noise
Horizontal dotted line
Television not responding
to remote control
Items to Check and Actions to follow
• This may be caused by obstruction to the antenna due
to high rise buildings or hills. Using a highly directional
antenna may improve the picture.
• Check if the TV's AC power cord is plugged into the
mains socket.
• Unplug the TV, wait for 60 seconds. Then reinsert plug
into the mains socket and turn on the TV again.
• Check antenna connections at the rear of the TV to see
if it is properly connected to the TV.
• Possible broadcast station trouble.
Try another channel.
• Adjust the contrast and brightness settings.
• Check the Closed Captions control. Some TEXT modes
could block the screen.
• Increase the VOLUME.
• Check if the TV is muted; press the MUTE button on the
remote control.
• Adjust the contrast, color and brightness settings.
• Poor picture quality may occur when an activated S-VHS
camera or camcorder is connected to your TV and the
other peripheral at the same time. Switch off one of the
peripherals.
• Check the antenna connection.
• This may be caused by electrical interference (e.g. hair
dryer, nearby neon lights, etc.)
• Turn off the equipment.
• Check whether the batteries are working. Replace if
necessary.
• Clean the remote control sensor lens on the TV.
• You can still use the buttons at the front of your TV.
• Select the TV mode to ensure your remote control is set
in the TV mode.
31