Start Procedure; Automatic Defrost - Trotec MD 01-10 Manual De Instrucciones

Start procedure

Insert air filter
A.
B.
C.
D.
B - 7
Switch device on
1. Ensure that the condensation tank is empty and
inserted correctly. Otherwise, the device will not
operate!
2. Insert the mains plug into a properly secured
mains power socket.
3. Check whether the condensation tank indicator
light (11) is out.
4. Switch on the device by turning the rotary switch
clockwise until the operation indicator light (10)
lights up.
5. Adjust the room humidity level with the rotary
switch.

Automatic defrost

If the room temperature is below 12 °C, the
evaporator
dehumidifying. The device then carries out an
automatic defrost. The duration of the defrost can
vary.
• The automatic defrost is interrupted when you turn
the selector switch (8).
• Do not turn off the device during the automatic
defrost. Do not remove the mains plug from the
mains socket.
Operating Manual – Dehumidifier MD 01-10
becomes covered in frost while
EN