OPERATION
When installing the device, make sure there is no highly-inflammable
material (decoration articles, etc.) within a distance of min. 0.5 m.
Unpack the LED Globe Outdoor.
Remove the plastic bag from all parts.
Install the stake at the desired installation-spot
(only in the soil).
Place the globe gently on the stake and turn it
counter-clockwise until it fits securely.
Connect the connection cables with one another.
Connect the device to the mains with the
transformer. The transformer must only be
operated in closed rooms.
With the control button, you can switch the device
on and off. Hold the button a few seconds to turn
on, then do the same to switch off.
You can select the programs by pressing the
control button.
Program:
Characteristic:
1
Slow color change
2
Green
3
Blue
4
Red
5
Violet
6
Off-white
7
Constant color change
Note: The LED Globe Outdoor has a built-in Memory-Function. The device "remembers" which program was
being run when it is turned off. It begins with the same program when turned back on again.
CLEANING AND MAINTENANCE
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
DANGER OF FIRE!
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
10/19
51931134_V_1_0.DOC