Quick Install Guide
This
installation
instructions for installing the DAP-3310/
DAP-3410
Wireless N Exterior Access Point
1
on your network. For additional information
about how to use the Access Point, please see
the datasheet and user manual from the D-Link
support website.
DAP-3310 is a 2.4GHz Single Band AP; DAP-3410 is a 5GHz
1
Single Band AP.
The DAP-3310/DAP-3410 support the IP65 water/dust-proof
2
standard. It is recommended that you place the AP under a
roof, shelter, or weather-proof container in severe weather
environment.
Minimum System Requirements
- Computer with Windows, MAC OS, or Linux-
based operating system, and an Ethernet
adapter installed
- Internet Explorer 7.0, Mozilla Firefox
12.0, Safari 4.0, or Chrome 20.0 or newer
Package Contents
- DAP-3310/DAP-3410 Wireless N Exterior
Access Point
- PoE Injector
- Power Adapter (48 V/0.5 A)
- Pole Mount (Non-detachable)
- Wall Mount
- Two Plastic Mounting Ties
If any of the above items are missing, please
contact your reseller.
2 D-Link DAP-3310/DAP-3410 Quick Install Guide
guide
provides
basic
version
®
Physical Installation
STEP 1: Connect an Ethernet Cable
LAN (PoE) Port on the AP.
2
Ethernet cable is not included in the package
3
STEP 2: Mount the AP to a Pole or Wall
2A: Pole Mounting
2B: Wall Mounting
to the
3