US Robotics Wireless MAXg Router Guía Breve De Instalación página 9

My computer does not establish a wireless connection to the Wireless MAXg Router
after I changed the settings.
Possible Solution:
In the configuration utility for your wireless card or adapter, ensure that you are contacting the
correct Wireless MAXg Router by verifying the MAC address. The MAC address is located on the
label on the bottom of the Wireless MAXg Router. Ensure that the correct Pass phrase and encryp-
tion option are being used. If you changed the settings in the configuration of the Wireless MAXg
Router, you must also change the settings of every Wireless PC Card, PCI Adapter, or USB Adapter
attached to this network. The settings of the Wireless PC Cards, PCI Adapters, or USB Adapters
must match the new settings of the Wireless MAXg Router. Refer to the Tutorial in the Web User
Interface for additional information regarding new wireless clients. To access the Tutorial, open a
Web browser and type 192.168.2.1/tutorial_addclient.asp
I am experiencing poor wireless link quality.
Possible Solution:
Low link quality or range can be caused by environmental interference, such as lead-based paint
and concrete walls. Try to move the antenna of the Wireless MAXg Router or to reposition the
wireless clients to improve the link quality.
Possible Solution:
Some electronic items, such as 2.4Ghz phones, may interfere with the wireless signal and affect
your wireless range and link quality. Try creating a wireless connection on a different channel.
Refer to the Configuration section of the User Guide on the Installation CD-ROM for more informa-
tion on changing your wireless settings.
5