Saci [e] Winner Manual De Instalación Y Manteniemiento página 26

8 FIRST START-UP
EXAMPLE OF PROGRAMMING AND THE PUMP FLOW CALCULATED:
Volume of the swimming pool (parameter 1.5): 50 m
Daily recirculations (parameter 2.01): 2
Therefore we want to recirculate the 50 m
Number of daily cycles (parameter 2.02): 2
Therefore we have decided to have two separate periods during the day for filtering.
In the parameters 2.03 to 2.06 enter the start and end times.
For example, section 1 from 06:00 to 09:00, three hours of filtration, and section 2 from 21:00 to 04:00, seven
hours of filtration. The two sections add up to 10 hours.
Filtration flow = Volume of water to filter / Filtration time = (2x50) m
The pump will adjust its speed to filter at 10 m
will increase the motor speed.
There will also be changes in speed or time if programmes are used for other water games that also
recirculate water through the filter.
Once you have informed the frequency converter of the swimming pool volume, the next and last two
parameters of the general setup menu are to protect the filter:
1 . 6
In this parameter enter the maximum flow of the filter
1 . 7
In this parameter enter the maximum pressure the filter can withstand to limit the capacity of the pump.
3
twice (2x50 = 100 m
3
/h and, according to the increase in load loss (dirty filter), it
3
F I L T E R
1 5 . 0
M A X I M U M
F I L T E R
2 . 5
)
3
3 / 10 hours = 10 m
F L O W
m 3 / h
N e x t
P R E S S U R E
B a r
N e x t
3 /h
[e] Winner
27