Saci [e] Winner Manual De Instalación Y Manteniemiento página 31

10 SETUP MENU
5 FILTER WASH
Par. Description
5.1 Wash flow
5.2 Wash duration
5.3 Rinse duration
5.4 Dirty filter warning pressure
6 HEATING SYSTEM
Par. Description
6.1 Heating system
6.2 Minimum flow for heating
7 POOL CLEANER
Par. Description
7.1 Pool cleaner flow
7.2 Pool cleaner duration
8 PROGRAMMES
Par. Description
8.1 Rename P1
8.2 Flow P1
8.3 Duration P1
8.4 Output status P1
8.5 Rename P2
8.6 Flow P2
8.7 Duration P2
8.8 Output status P2
[e] Winner
32
VALUES
Units
Default Min.
m /h 22,5 5
3
min 5 1
min 1 0
bar 1,5 1
VALUES
Units
Default Min.
NO NO
m /h 15 5
3
VALUES
Units
Default Min.
m /h 25 Par 1.6
3
min 60 1
VALUES
Units
Default Min.
P1
m /h 15 5
3
min 1 0
OFF / OUTPUT 1 /
OFF
OUTPUT 2
P2
m 3 /h 15 5
min 1 0
OFF / OUTPUT 1 /
OFF
OUTPUT 2
Max.
Flow when the button BACK WASH is
30
pressed to initiate filter wash and rinse
60 Time spent washing the filter
60 Time spent rinsing the filter
Pressure limit at which the warning to
Par 1.7
clean the filter will be triggered
Max.
If there is a swimming pool water hea-
YES ter, enable and reserve intake 2 to start
the pump.
Pump operating flow when it receives
Par 1.6
the signal from the water heater
Max.
Pump operating flow when the
30
VACUUM button is pressed
Time during which pool cleaner mode
600
will function
Max.
To enter the name you wish to appear
when P1 is pressed
Flow at which the pump will operate
30
when P1 is pressed
120 Duration of the programme P1
Output that you will activate when you
enter the programme
To enter the name you wish to appear
when P2 is pressed
Flow at which the pump will operate
30
when P2 is pressed
120 Duration of the programme P2
Output that you will activate when you
enter the programme
Notes
Notes
Notes
Notes