Mizuhosi 5803 Manual De Propietario página 29

Rotation safety lock switch on
Lateral roll (tilt) left of right w/
rotation safety lock switch on
Release lateral roll (tilt) button
Release button. (all functions
except tilt when rocker switch is
on)
Traction arc switch closed
Lateral roll (tilt) left or right
Rotation safety lock switch off
Handle loose
Rotation safety lock switch on.
Foot end crossbar tilted left or
right
Rotation safety lock off.
Power down
MIZUHOSI 2009
Brake engages
Brake releases; tilt motor drives
Tilt motor ceases; brake engages
Immediate cessation of above.
No additional function
Tilt motor disabled, brake motor
disabled
Brake motor disabled
Tilt motor drives until tilt drive
status indicator lights
Tilt left or right disabled
Brake engages. LED turns on for
15-25 seconds later, LED off
29
 Same as rotation safety lock
switch off.
 Also verify switch, wiring, and
mounting of brake on sensor if
brake is weak, brake force
adjustment is incorrect
 Same as tilt with rocker switch
off
 Additionally: brake motor faulty
or wiring not connected
 Hand pendant has failed, PC
board has failed
 Same as for tilt w/rocker on
 Hand pendant has failed
 PC board has failed
 Faulty switch,
 broken wiring connection,
 switch adjustment incorrect,
 PC board has failed
Same.
 Power off
 Power to PC board not
connected
 Power supply non-op, PC board
non-op
 Cable from PC board to tilt motor
not connected
 Tilt motor non-op
 Home sensor has failed
 Home sensor wiring shorted
 Sensor misadjusted,
 1/r sensor has failed, 1/r sensor
wiring shorted or disconnected
 Sensor misadjusted
 Lock sensor has failed
 Lock sensor wiring disconnected
 Traction arc switch closed
 Traction arc switch wiring shorted
 Tilt left or right limit switch has
failed
 Wiring disconnected
 PC board has failed
 Motor has failed
 Wiring to motor disconnected
 LED has failed; wiring
disconnected
 PC board has failed
 No battery power
NW0498 Rev E