Base Orientation; Model Number And Serial Number - Mizuhosi 5803 Manual De Propietario

3.1 Base Orientation

The control end of the base is considered the head end, and the opposite end is the foot
end. The right side of the base is the side to the operator's right when standing at the
head end looking toward the foot end. The general nomenclature and orientation of the
base is shown in figure 1, 2 and 3. Refer to the appropriate owners manual supplied
with each table top for table top component Identification and more detailed information
about the use of each table top.

3.2 Model Number and Serial Number

The model number and serial number are printed on the Identification label located at
the head end base. This label is located to the right of the on/off switch as shown
below.
MIZUHOSI 2009
On/Off
"Fault", & Power lights
Switch
Figure 4: Head End; Base Outside
Reset Button
Power Cord
Circuit Breaker
Plug In
Head end
Base
Beam Side
Figure 5: Head End; Base Beam Side
"Battery Status"
Head end
Base
Out Side
Model/Serial
Number
Identification
Label
External Ground
Stud
9
NW0498 Rev E