MAXA HCA22 Manual De Usuario página 45

HCA(/B) 22-29-35-42, HCA/4(B) 22-35-50) and 900 x 900 mm (models HCA(/B) 60-80, HCA/4(B) 60-80-120). In the
case of damp environments, insulate the hanging brackets with specific self-adhesive insolents.
To close one or more of the air outlet mouths, use the specific KIT.
ATTENTION!
Do not close more than 2 mouths. Do not restrict the airflow in any way other than that illustrated in the figure.
II. 2.1 BEFORE INSTALLATION
Carry the packaged unit as close as possible to the installation spot. It will be easier to install the unit using a lift.
IMPORTANT!
Do not move the unit by the condensation drain pipe or the water connections. Hold it by the four corners.
II. 2.2 INSTALLATION
Mark the position of the support braces; the connection and condensation drain pipes, the power cables and any
wired control cables. The cardboard template, provided, can be useful during this operation.
45