Tristar KA-5033 Manual De Usuario página 7

Operation and maintenance
Remove all packaging of the device.
Check if the voltage of the appliance corresponds to the main voltage of your home.
Rated voltage : AC220-240V 50Hz.
Place the device on a flat stable surface and ensure a minimum of 10 cm. free space around
the device. This device is not suitable for installation in a cabinet or for outside use.
Before first use
When the device is turned on for the first time, a slight odor will occur. This is normal, ensure
adequate ventilation. This fragrance is only temporary and will disappear soon.
Use
Plug into a grounded outlet and switchthe device on by the on / off switches (No. 2).
Do not put anything on the heater, such as clothing or towels. Do not use the heater in the
bathroom or other wet areas.The grates of the heater can be very hot
The exterior of the unit is hot. Avoid any physical contact, it can cause serious injury.
Let it cool down completely before it is moved.
Cleaning
We recommend to clean the machine regularly, at least once a mont. Follow the instructions
below to clean the device.
Turn off the heater before you start cleaning it. Unplug the power cord and wait until it has
cooled down completely
Clean the front grid with a vacuum cleaner to clean dust from the inside and to remove from
the grid. Clean the outside of the appliance with a dry cloth. Do not use water or chemical
treatment. Do not immerse the device in water or other liquid.
7
UK