Installation And Wiring; What Is Included In The Box; Before Starting - Clarion VM700B Manual De Instrucciones

4. INSTALLATION AND WIRING
Read these instructions and the following precautions carefully.
What is Included in the Box Package
In addition to this manual, the box contains:
1 - VM700B LCD Monitor
1 - M Signal Cable
1 - IR Remote
1 - Battery CR05 for IR Remote
4 - Screws M4x8
1 - Metal Plate
1 - Mounting Tray
1 - Owner's Manual and Installation Manual

Before Starting

Disconnect the negative (-) battery terminal on the vehicle's battery.
WARNING
To prevent short circuits during installation,
be sure to disconnect the battery.
Precautions
• This unit is exclusively for vehicles with a negative ground, 1V power supply.
Do not open the case. There are no user-serviceable parts inside. If you require
assistance, consult your Clarion dealer or an authorized Clarion service center.
• Use a soft dry cloth to clean the screen. Never use a rough cloth, thinner, benzene,
alcohol, or other solvent. The screen surface is easy to scratch, do not rub it when
cleaning.
• Always use great care when attaching anything to a vehicle! Visually inspect all
sides of any potential screw location to ensure no damage will occur.
NEVER install this monitor where it is visible from the driver's
seat, or where it could injure any vehicle occupant in case of an
accident. Ensure that your installation does not create risk of
head-strike injury, and that the monitor will remain securely
mounted in the case of an accident or sudden maneuver.
VM700B Manual 08509 R.indd 1
WARNING
Car battery
1
VM700B
8/8/009 9:58:7 AM