Yarvik JOY PMP200 Manual De Instrucciones página 8

ENGLISH
• Power Indicator
When the device is fully charged the power
indicator is full.
When the power indicator is empty, the battery is
discharged and must be charged before the next
use.
During charging, the player must be turned on.
Otherwise it can not be charged nor can it be
detected by your computer. Turn the player off
when not in use.
During charging, do not disconnect the USB
cable. The player may remain in USB mode.
When nished charging, exit USB mode by
disconnecting the USB cable.
Basic functions
Turning the player ON and OFF
You can turn the player ON and OFF by holding the
"play/pause" button.
Button functions
1. "PLAY" button: Play, Pause/ Stop
(press button)
2. "M" button: Selection, Enter menu
(press button)
3 "NEXT" button: Next in menu/ le, Track,
Fast forward (press button)
4. "PRE" button: Previous in menu/ le, Track, Fast
reverse (press button)
5. "O" button: Increase or reduce volume
(press button)
Enter menu
Enter all menus by pressing "M" on the keypad. The
menu includes a main menu and sub-menus.
Main menu: Hold "M" to enter.
Sub-menu: Press "M" to enter.
Explanation of button operation
Buttons can be operated in two ways:
"Press" means press and release immediately.
"Hold" means press and continue pressing until the
desired action occurs.
Playing music
• Brief operation
1. Plug earphones into the earphone jack of the
PMP200.
2. Turn on the player, enter "MUSIC" mode, and press
"PLAY" to start playback.
3. "PRE" button: To select the previous track/song.
"NEXT" button: To select the next track/song.
4. Volume adjustment:
Press "VOL" button.
Press "PRE" button to decrease volume.
Press "NEXT" button to increase volume.
5. Repeat play setting: Durng playback, pressing the
"M" button will enter the submenu for repeat play;
it includes seven selections: Normal, Repeat one,
Folder, Repeat folder, Repeat all, Random, Intro.
Selection mode, which includes seven modes:
Natural, Rock, Pop, Classic, Soft, Jazz, DBB.
• Playing speed (Play submenu)
When playing music (only applies to MP3 les), you
can choose different play speeds (such as fast or
slow), but the voice will not change:
In play mode:
1. Press "M" to enter the play sub-menu.
2. Press "Next" to enter the "Display speed" menu.
3. Press "M" to enter the "Display speed" menu.
4. Press "Next" to increase the playback speed; press
"PRE" to reduce the playback speed.
Attention:
Once the playback speed is set, this will affect every
song until it is changed again.
• Repeat mode (Play submenu)
1. Please refer to the following descriptions.
2. Enter through the play submenu.
• Synchronised lyrics display
The PMP200 supports the use of "*.Irc" lyric les for
synchronised lyrics display when playing music.
How to use the lyrics le:
The song and lyric le must have the same name.
For example:
The song le name is xxx.MP3
The lyric le name should be xxx.LRC
If the song le has a matching lyric le, the lyrics will be
shown automatically when
the song is played.
What happens when an .LRC le is played back?
1. The matching lyrics le is found. The red dot at the
bottom of the screen turns green.
2. Press "M" button enter into the lyric interface.
3. Lyrics are shown on the screen.
4. Press the "M" button to return to music playback
mode.
A-B repeat
1. Enter the music playback or recording playback
mode.
2. Press "M" to enter the play submenu.
3. Press "NEXT" to select the "Repeat mode" menu.
4. Press "M" button enter "Repeat mode".