Connect Bmu To Existing Network With Access™ Battery Charger - MicroPower Access BMU Instrucciones De Uso

The settings made in the Access™ Service tool or
the NFC app which must be connected to the
appropriate Access™ BMU.
Settings of charging parameters can also be made
using the menu system in the Access™ battery
charger when they are connected to each other.
Caution
Incorrectly set charging parameters can damage
the battery.
8
Connect BMU to existing
network with Access™ Battery
charger
1. Set the charger's charging parameter Source
in the menu Service/Charging parameter to
BMU or another BMU option.
2. Connect the charger to the battery that has the
relevant Access™ BMU fitted.
3. If charging starts within 1 minute the Access™
BMU has succeeded in connecting to the
network.
Battery ID is shown on the Access™ battery
charger's display.