Maintenance; Technical Data - Foy LO314 Manual De Usuario

ORBITAL MOVEMENT
Orbital movement is ideal for fast cutting ac-
tion when removing old finishes, smoothing
rough wood, cutting stock down to required
dimensions, or for finishing surfaces to be
painted. The sandpaper moves in tiny orbits,
allowing the sandpaper to move easily.

MAINTENANCE

SANDPAPER
Inspect the sandpaper. The use of worn-out
sandpaper will degrade efficiency and cause
possible damage to the pad, replace the sand-
paper as soon an excessive abrasion is noted.
MOUNTING SCREWS
Regularly inspect all mounting screws and en-
sure that they are properly tightened. Should
any of the screws be loose, retighten them
immediately. Failure to follow this instruction
could result in serious hazard.
10

TECHNICAL DATA

VOLTAGE-FREQUENCY
SANDER SIZE
ORBS PER MINUTE
POWER
WEIGHT
110 V ~ 60 Hz
104 mm x 112 mm
11 000
160 W
1,4 kg (2,7 lb)