AirScape MiniDive Pro Instrucciones De Empleo página 3

Thanks for choosing MiniDive. You are now free to breath under water with an equipment made and
designed with the collaboration of beginners and experienced underwater divers.
To begin with, before the first use of a MiniDive product, it is very important to entirely read and
understand this instruction manual.
In order to show that you took notice of this manual, please inform MiniDive through the page
named "contact" on the website www.minidive.com. This operation is compulsory and only takes a
few seconds. You just need the serial number of the product,
the tank, beginning by 000 or M66.
Please, always be sure that the product is used according to the conditions defined in this manual,
no matter who the user is.
MiniDive can not be held as responsible of any material or physical accident in case of non respect
of the given instructions.
MiniDive Pro (Pro+, Carbon) was developed to be used in sea or swimming pools. A use in a different
environment can potentially accelerate the aging of the equipment.
MiniDive retains the right to change or to improve the manual without warning. Please get to know
the current version during the usage of the product.
It is necessary to keep the user manual during the life of the product. You can also find it on the
updated version website www.minidive.com.
You can also consult our help section with video/tutorials directly on our website.
The end of particular parties contains the mention "WARNINGS" to underline a specific situation
which have to be taken into consideration to avoid a risky situation.
To be put in a plane for a journey, the tank must not be pressurized, you will certainly need to
unscrew the cylinder tank from the valve. To do this, drag the protection of the tank towards the
valve and unscrew (counterclockwise) simply the 2 elements. These 2 elements must be screwed
down with the Original O-ring delivered by MiniDive, the torque must be 90 N.m (regarding valve's
manufacturer), please note that regarding the reglementation, you are responsible for reassembling
the equipment.
*
Preamble
INSTRUCTIONS TO RESPECT IMPERATIVELY
Open COMPLETELY the valve before use
NEVER block your breathing, breathe continuously
NEVER go up to the surface faster than air bubbles
Use at SHALLOW depth
Watch your MANOMETER VERY REGULARLY
USE PROHIBITED WITHOUT KNOWLEDGE OF USE HAZARDS
which is placed above the label put on
2