babymoov Babyphone High Care Instrucciones De Uso página 16

REMARKS
1. Channel and digital code choice
If in the unlikely event your next door neighbor also has the same model of baby monitor and program
with the same channel and digital code, then you may need to select a new channel and digital code
or otherwise you will hear each other's baby. Repeat the above steps, besure you also program the receiver
with the same new channel and digital code.
2. Power choice
Note with low power, the communication distance will become shorter but the battery life can be
prolonged. Besides, the level of emitted radiation is also reduced.
3. Distance alert
This distance control function may be useful to watch baby's activities in his room. The transmitter is
placed on the child and if he moves away more than 25 meters, an alert will be heard from the receiver
to alert parents.
N.B.: if the out of range function is already On on the transmitter, the receiver will automatically activate
the distance alert (as indicated by the letter
or Off.
Out-of-range alert setting
in Transmitter
ON
ON
OFF
OFF
ELo
4. Temperature alarm
• It is recommended to have at least ±5°C between the settings of upper and lower temperature limit
from the current temperature reading, otherwise the temperature alarm can often be heard
whenever the baby's room temperature changes lightly.
• In case there is a sudden temperature change, the sensor may need to take a few minutes before it
can settle to the new environment and show the correct reading on the screen.
• Caution : because of the heat produced bu the device itself, a margin of error + 5°C may be noticed.
Please add 5°C to the upper and lower temperature to consider this gap.
A / Transmitter
• Place the transmitter about 1 m from the cradle, directing the microphone (5) towards the baby.
• Use the selection button (2) to adjust the microphone sensitivity (volume indicator = bar chart on the screen).
The more bars you show, the more sensitive the microphone is to sounds.
• As soon as the transmitter detects a sound, the screen lights up and the transmission symbol
is displayed.
on the LCD screen), wether the out of range setting is On
Out-of-range alert setting
in Receiver
ON
OFF
ON
OFF
ON or OFF
OPERATION
BABYPHONE HIGH CARE • Instruction Manual
Remarks
Alarm function normally
No alarm even when out of range
Always give alarm no matter out of range
or not
No alarm even when out of range
Alarm sound once distance apart exceed
20-30m (provid appears on rerceiver LCD)
17