ISEO CSF GERA Manual De Instalación Y Servicio página 20

ATTENTION!
lDispose of batteries in accordance with the applicable regulations in the Country.
TEMPERATURE MAX: -
CYLINDER LUBRIFICATION
Iseo recommends to lubrificate cylinders at least once a year using "RIVOLTA T.R.S. plus" lubricant
Lubrication should only be carried out as shown above:
• clean teeth of key carefully
• place a drop of lubricant on teeth
• insert key into cylinder a few times
Product compliance
The product is in compliance with EMC Directives (electromagnetic compatibility).
The products marked with EX Logo are certified by ICIM notified institute nr.0425 in accordance with
ATEX directives with following classification: Ex II 2 G EEx ib IIB T4
II = Group of equipment II. Comprises equipment intended for use in places likely to become endangered by
explosive atmospheres. Level of protection: comprises products designed to remain within their operational
parameters, stated by the manufacturer, and based on a high level of protection for their intended use, in
areas in which explosive atmospheres caused by mixtures of air and gases, vapors, mists or air/dust
mixtures are likely to occur
2 = Equipment category - High protection
G = Type of explosive atmosphere: gas vapors
EEx = Explosion protections
ib = Intrinsic safety of the product (EN 60079-11)
IIB = Group of gas (Ethylene)
T4 = Temperature class 135°C (not to be confused with the declared maximum operating temperature 50°C)
20
BATTERIES MUST BE REINTRODUCED INTO KEY WITHIN 3 MINUTES
OTHERWISE INTERNAL CLOCK SETTING WILL BE LOST.
IN THE LATTER CASE, RESTORE CLOCK SETTING BY SYNCHRONISING
WITH PC SOFTWARE.
20 +50