Extensions And Connections; Troubleshooting - hafele FT 200 Manual De Instrucciones

10. Extensions and connections

The system can be extended. The following connections are available on the
FT 200 / FT 200 CAP furniture terminal:
Fig. 2: FT 200 / FT 200 CAP connections
Connection
1 Reset button
2 Potential-free input/output
3 Power supply output
4 Power supply input
5 Furniture lock
EFL 3 DG2 / EFL 3C DG2
6 Signal generator, visual (LED)
7 For connecting smaller
consumers, such as Piezo sound
generators or signal generators
8 Antenna FAN 200
9 Multi-lock adapter MLA 8

11. Troubleshooting

Fault when opening
Acoustic signal is heard twice.
LED for the FAN 200 antenna
does not switch from red to green.
Locks do not open.
38
Description

• Reset 12. Reset
• Relay output port NO, NC, COM
• Connection via separate terminal clamp

• 3.2 Technical data

• 3.2 Technical data
• Basic components

• Extension 3.1 System overview
• 5V output
• Not yet supported by the current firmware.
• Basic components

• Extension 3.1 System overview
Possible cause
• User key is not
authorised.
• Distance between
user key and antenna
too great.
• User key is not
authorised.
• User key is not
authorised.
• Closing mechanism
defective.
• Plug connections
loose.

3.1 System overview

3.1 System overview
Remedy
• Program the user key.

7. Programming user keys
• Observe the maximum distance of
25 mm between the user key and
antenna.
• Program the user key.

7. Programming user keys
• Program the user key.

7. Programming user keys
• Check closing mechanism.
• Check plug connections.