Sunoptic Surgical SSL-3736-2 Manual De Usuario página 4

The charger does not have serviceable parts. Contact Sunoptic Technologies
•
instructions.
• Do not modify or change the power cord. The power cord should be plugged into a hospital grade
outlet.
• Do not bend the power cord forcibly or place a heavy object on it. This will damage the cord and
may cause fire or electrical shock.
• Use only the charger and charger accessories as intended. Do not modify the device.
• Do not operate the charger at a different voltage than what is listed on the unit and in this
Instructions for Use.
Unplug the power supply from the wall socket during extended periods on non-use. Disconnect
•
the power plug by pulling from the plug housing and not the cord.
• If the charger or the battery generates excessive heat, becomes discolored, emits an odor, or
leaks disconnect the power cord from the wall socket immediately.
This battery charger may not be located in the vicinity of a patient. In accordance with EN60601-
•
1-1, the horizontal distance must be at least 1.5 meters.
Do not insert a fully charged battery into the charger repeatedly. Due to the high initial charge, the
•
battery could be overcharged which could lead to damage to the battery and to the battery
charger.
This product has been tested and found to comply with the limits for a Class B digital device,
•
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. If this device is causing interference with
other electrical equipment, relocate the charger further away from the other equipment
LIT-232 Sunoptic Surgical
Rev. B
®
Page 4 of 48
®
for replacement
.
(English)