Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
Charging via adapter
If run with the installed recharge-
able nickel metal hydride batteries,
use the supplied mains adapter as
a charger. Check whether the mains
voltage given on the rating plate of
the mains adapter matches the local
mains voltage. The appliance is not
disconnected from the power supply
until the mains adapter is discon-
nected.
1
Insert the mains adapter cable in
E
socket
, plug in the mains adapt-
er plug.
– Charge indicator
red.
– Charge indicator color changes
to blue when fully charged.
Note
Fully charge the batteries (24
7
hours) before using for the first time
or if the batteries have not been
used for a long time.
After
the
batteries
7
charged, the charging time is
approx. 12 hours when the appli-
ance is switched off. If you switch
on the appliance while it is char-
ing, charging will stop.
The ambient temperature should
7
be between 5°C and 40°C.
_____________________________
D
lights up
are
first
When charged, the appliance
7
can be used for approx 30 min-
utes. We recommend you do not
recharge the batteries after each
use, especially if you have not
used the appliance for the full
30 minute running time. Do not
recharge the batteries until they
have been used to their full capac-
ity. This extends their life. Avoid
daily charging.
USB charging via
computer
Note:
Charging time in USB mode is
7
higher and needs approximately
double the time of the mains adap-
tor
1
Ensure the beard trimmer is
switched OFF.
2
Connect the USB cable to the USB
port on the computer.
3
Connect the USB cable to the
beard trimmer.
4
Make sure the beard trimmer is
OFF, it only charges when it is
switched off.
5
During charging, the RED charg-
ing indicator
D
lights up.
ENGLISH
17
Publicidad
