Descargar Imprimir esta página

Unpacking And Assembling - Base Camp XB13 Manual De Instrucciones

Publicidad

Idiomas disponibles

Idiomas disponibles

SPECIFICATIONS
CAUTION: Certified for use only with Liquid Propane
LP-gas cylinders of the U.S. Department of Transportation (DOT) or Transport Canada, CAN/CSA B339.
Model:
XB13
(F235300)
Rating: BTU
10,000 -13,000
Battery
6(D cell batteries)
Not included
Run Time (Full Charge)
30 minutes
Fuel Source
Propane
Fuel Supply Pressure
Max. Bottle
(to regulator):
Pressure
Gas Supply Pressure
(Regulator out):
Electrical Input
High Temperature Control:
125°(F)
Temperature Rise
35°(F)
Ignition
Piezo Spark
DIMENSIONS
Model:
Length(in)
XB13
12 1/2"
XW18
19 1/4"
(Faucet to Handle)

UNPACKING and ASSEMBLING

1.
Remove heater from carton.
2.
Remove all protective material which may have been applied
to the heater for shipment.
3.
Check the appliance for possible shipping damage and
straighten out all hoses to remove any kinks or twists. If any
damage is found immediately contact the manufacturer at
1-800-251-0001.
4.
Install handle assembly by screwing them into place.
5.
Attach the supplied regulator by rotating the t-wing nut in a
"clockwise" direction carefully not to over tighten.
6.
Attach the LP cylinder to the regulator by rotating in a
"clockwise" direction. Only use LP cylinders with proper fuel
type approved for the appliance must be used. Check for gas
leaks with soapy water.
DO NOT USE A FLAME TO CHECK FOR LEAKS.
XW18
(F235325)
10,000 -17,000
2.6A/HR Sealed
Lead Acid Internal
Battery
40 minutes
Propane
Max. Bottle
Pressure
1 1" WC
1 1" WC
1 1 5V, 60 Hz, 1Ø, 2A
Min. Operating
Voltage:100V
230 Watts (W)
125°(F)
42°(F)
Piezo Spark
Width(in)
Height(in)
7 1/2"
12"
7 1/2"
12"
Basecamp, Inc.| Portable Shower
Weight(LBS)
14 lbs.
15 lbs.
3
Operating Instructions and Owner's Manual
Model XB13
Model XW18
Fuse
(Model XW18)
Regulator
Assembly
Handle Assembly
Pump Inlet Connection

Publicidad

loading

Este manual también es adecuado para:

Xw18F235300F235325