Float Switch And Panel Chart - Xylem GOULDS WATER TECHNOLOGY 1GD51G1A Serie Manual De Instruccion

FLOAT SWITCH AND PANEL CHART

The purpose of this chart is to show the required
switch quantities and the function of each switch in
a typical wastewater system. The quantities required
vary depending on the switch type, single-action or
wide-angle. Switch quantities also vary by panel type:
simplex with and without alarms, and duplex with
alarms.
Duplex Panels using single-action switches:
Three Float Panel Wiring
SW1 Bottom
SW2 Middle
SW3 Top
Four Float Panel Wiring ②
SW1 Bottom
SW2 2nd
SW3 3rd
SW4 Top
Duplex Panels using wide-angle switches:
Three Float Panel Wiring
SW1 Bottom
Off
SW2 Top
Four Float Panel Wiring
SW1 Bottom
SW2 Middle
SW3 Top
Simplex Panel using single-action switches:
Simplex Panel with Alarm ①
SW1 Bottom
SW2 Middle
SW3 Top
Simplex Panel with No Alarm
SW1 Bottom
SW2 Top
Simplex Panel using wide-angle switches:
Simplex Panel with Alarm
SW1 Bottom
SW2 Top
Simplex Panel with No Alarm
SW1
Pumps Off
1st Pump On
2nd Pump & Alarm On
Pumps Off
1st Pump On
2nd Pump On
Alarm On
1st Pump On/Both
2nd Pump & Alarm On
1st Pump On/Both Off
2nd Pump On
Alarm On
Pump Off
Pump On
Alarm On/Off
Pump Off
Pump On
Pump On/Off
Alarm On/Off
Pump On/Off
Inlet
Alarm SW3
Pump On SW2
Pump Off SW1
Inlet
Alarm SW4
Lag Pump On
SW3
Lead Pump On
SW2
Pump Off
SW1
Duplex ②
Discharge
Simplex ①
Discharge
7