Controls & Connections - AOC LE32D1332 Manual De Instrucciones

Controls & Connections
1
2
3
4
5
6
7
Item Description
HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-digital audio/video interface
between this TV and any HDMI-equipped audio/video equipment, such as a set-top box, DVD player, Blu-ray
Disc player, A/V receiver as well as PC. HDMI supports enhanced, or high-definition video, plus digital audio.
HDMI
HDMI connection is necessary to view 480i, 480p, 720p, 1080i and 1080p formats.
Be sure to use only an HDMI cable that bears the HDMI logo.
Connects to a personal computer's video output connector using HD15-HD15 cable (analog RGB). Can also
be connected to other analog RGB equipment. See "PC Input Signal Reference Chart" on page 15 for the
signals that can be displayed.
PC In (VGA)
For some Apple Macintosh computers, it may be necessary to use an adapter (not supplied). If this is the case,
connect the adapter to the computer before connecting the HD15-HD15 cable.
If the picture is noisy, flickering or not clear, adjust Phase and Pitch of Screen settings.
Connects to the COMPOSITE VIDEO output jack from your video equipment that has COMPOSITE VIDEO,
and audio (L/R) jacks can connect audio in source to your TV.
Component/AV In Connects to your TV's component video (YPbPr) and audio in jacks. Component video provides better picture
quality than the composite video connections. Component video (YPbPr) connection is necessary to view 480i,
480p, 720p, 1080i and 1080p formats.
RF (Radio Frequency or modulated signal design used as the carrier for television broadcasts.) input that
VHF/UHF/Cable In
connects to your Cable or VHF/UHF antenna.
Connects to your headphones. If your headphones do not match the jack, use a suitable plug adapter (not
Headphone
supplied).
Insert USB storage device to the USB 2.0 port to view photos, videos, and listen to music. / For future software
USB/Service
upgrades.
CVBS
VOL + Press to increase the sound volume level.
VOL - Press to decrease the sound volume level.
CH ▲ Press to select the next higher program number.
CH ▼ Press to select the next lower program number.
INPUT Press to select the input source.
MENU Press to enter or exit the menu screen.
POWER Press to turn on / off (standby) the TV set.
DVI-to-HDMI cable DVI-to-HDMI adapter
EARPHONE
10