Rds (Radio Data System) Display Function; Pty (Program Type) Search Function; Digital In Work Status; Aux1, Aux2 Work Status - Clatronic DVD 569 HC Instrucciones De Servicio

DVD 569 HC - GB 28.08.2003 14:42 Uhr
3. Single broadcasting station search.
Press FAST FWD button, it will search from current
frequency to higher frequency. It will stop searching
when the station is found and begin to listen in it.
Press FAST RWD button, it will search from current
frequency to lower frequency.
4. Manually search ,fine tuning and station store.
Change from the current frequency to a lower frequen-
cy using the LEFT arrow button. In the FM band range
each press of the button changes the frequency in
steps of 50 kHz (or 100 kHz). In the AM band range
the frequency changes in steps of 9 kHz (or 10 kHz).
In order to set a higher frequency, press the right-hand
arrow button. As soon as the station has been found,
press the SETUP button. Then use the NUMERIC
button to enter the desired station number.
5. Manually delete station.
For some false stations that auto-searched, press
CLR button to delete them.
6. Number select station.
Press NUMBER button to enter the station stored
number and press ENTER button, the system will go
to listen in that station. Press SKIP+, - button to switch
the previous or next station.
7. Frequency direct call.
If you know the station frequency ,you can directly call
(For example, press TITLE on the remote controller
.then enter 8860 and press TITLE to listen in FM
88.6MHz).
8. Mono/Stereo Switchover
Using the audio button you can switch between MO-
NO and STEREO.
RDS (radio dats system) display function
Since all RDS stations have PTY(program type), when
find a RDS station, the VFD will show its PTY. After 5 se-
conds, return to display the station frequence. If it is not
RDS station, display "NOT RDS".
Radio text(RT) is the information that the launch station
sends out temporarily, such as weather forecast. Once
DVD receiver gets RT, it will scroll displaying the RT on
the VFD.
PS (program Service Name) is the station number of the
launch station. Press DISPLAY button to switch VFD dis-
play receiving frequency, PTY or PS. If PS signal doesn't
received, it will display "NO PS".

PTY (program type) SEARCH function

Press PTY/RETURN button then press UP/DOWN
curson on the remote control unit, various program types
are displayed on the TV screen circularly.
NEWS
AFFAIRS (Current Affairs)
INFO (Information)
SPORT
EDUCATE (Education)
DRAMA
CULTURE (Cultures)
SCIENCE
VARIED (Varied Speech)
POPM (Pop Music)
ROCK M (Rock Music)
EASY M (Easy Listening)
LIGHT M (Light Classics M)
CLASSICS (Serious Classics)
OTHER M (Other Music)
WEATHER
Seite 31
FINANCE
CHILDREN (Children's Progs)
SOCIAL (Social Affairs)
RELIGION
PHONE IN
TRAVEL (Travel&Touring)
LEISURE (Leisure&Hobby)
JAZZ (Jazz Music)
COUNTRY (Country Music)
NATION M (National Music)
OLDIES (Oldies Music)
FOLK M (Folk Music)
DOCUMENT (Documentary)
TEST (Alarm Test)
ALARM!
After one PTY is selected, press SLOW or FWD/RWD
button on the remote control unit, the unit then begins
from minimum frequency or from current frequency to se-
arch the station with specified PTY. It will play as it finds
the station. Otherwise, it will display "NOT FIND" After se-
veral seconds, it will automatically listen in the first station
that is found.
After one PTY is selected, press FAST FWD or FAST
RWD button on the remote controller to search the speci-
fied PTY station from current place forward or backward.

DIGITAL IN work status

Press FUNCTION button, make the unit work on DVD
status. Press BAND button select OPTICAL or COAXIAL
status. The unit will work on OPTICAL or COAXIAL digital
signal input status.

AUX1, AUX2 work status

Press FUNCTION button, make the unit work on DVD
status Press BAND button, make the unit work on AUX1
or AUX2 status. The unit will play double channel AV sig-
nal input from AUX1 or AUX2.
Initial settings
Once the initial setting have been set, the player will
always operate with the same parameters. The setting will
be retained in the memory even after switching off the
power.
• Initial settings must be in the setup mode, but function
can be set in all mode.
• Using the setup menu, you may choose the play mode
setting, the various outputs, etc.
• During STOP or PLAY mode, press SETUP button on
the remote, you will see on the screen like picture 1.
Press SETUP button again to quit the setup menu and
return to the TV DISPLAY.
• Select the menu item desired by using up/down CUR-
SOR button, and then press the ENTER button. You
should see such as picture 2. In each menu page, the
menu items are showed on the left. Use the right
CURSOR button on the remote to the option list or
setting on the right. Then use up/down CURSOR but-
ton on the option list, press ENTER to choose. Use
the left CURSOR button to go back to the left menu
item to change others.
31