Use And Maintenance - MAXTOOLS AR200 Manual Del Usuario

English

USE AND MAINTENANCE

Use of the hose reel
1. Verify the correct functioning by pulling out the hose; at every turn of the drum you
will hear a series of clicks.
2. Pull out the hose and then let it retract slowly after hearing the first and the second
click.
3. When you want to rewind, pull out the hose until you hear the last click and then
let the hose retract slowly into the drum by helping out with your hands.
4. Periodically check the hose reel for any wear, damage or leak. Substitute any
damaged part.
Always hold the hose while rewinding; otherwise, you could run the risk of
Maintenance
Make sure the hose is in a good conservation status.
Clean the hose by means of a cloth soaked in water, in order to remove any dirt or
deposits and to guarantee a correct rewinding.
Do not use detergents or solvents that might prove incompatible with the building
materials.
Disassembling of the unit by unskilled personnel could prove risky; the risk could be
mainly related to the preloaded springs
10
WARNING
serious damage and/or injuries