DeLonghi DOLCE VITA ELETTRICO Manual De Instrucciones Para El Uso página 21

4.2.5 CHRONO
In "Chrono" mode, you can select one of the three preset
chrono-thermostat programs or the custom program. The
latter lets you set various temperatures ("Comfort" and
CHOICE OF PROGRAM
Press the "Mode" key until the icon
played. Then press the "Mode" and "-" keys to-
gether and hold them both down for at least 3
seconds.
Press the "+" or "-" keys to set the program. Press
The icon of the ASC function (see Ch. 4.3.1) starts
or the "-" key to de-activate it.
PROGRAM P1
FROM MONDAY TO FRIDAY
SATURDAY AND SUNDAY
PROGRAM P2
FROM MONDAY TO SUNDAY
PROGRAM P3
FROM MONDAY TO FRIDAY
SATURDAY AND SUNDAY
PROGRAM P4 - CUSTOM
With the "P4" program, you can set different temperatures
day of the week.
is dis-
HOURS MODE
0 - 6
6 - 9 Comfort
9 - 16
16 - 23 Comfort
23 - 0
0 - 7
7 - 23 Comfort
23 - 0
HOURS MODE
0 - 7
7 - 23 Comfort
23 - 0
HOURS MODE
0 - 6
6 - 9 Comfort
9 - 13
13 - 23 Comfort
23 - 0
0 - 7
7 - 23 Comfort
23 - 0
SETTING THE CURRENT DAY AND TIME
Before going on with the P4 custom program setup, check
that the hour and day of the week have been correctly set up.
If you fail to enter the setup in this way, press
the "Mode" key until the
the display.
Then press the "Mode" key again and hold
it down until the number indicating the day
Adjust the day of the week by using the "+"
or "-" keys (1=MON, 2=TUE,...7=SUN), then
Repeat the same procedure for the hours.
"-" keys to set the minutes then press the key
enter the P4 program setup.
SETTING THE P4 PROGRAM
To enter the P4 custom program setup, press the "MODE" key
RENT DAY AND TIME).
being programmed.
for each hour, between the "Comfort" temperature (two
procedure for each day of the week.
The weekly program is now set.
Press the key to activate the function or the "-" key to
de-activate it.
19
icon appears on
T Comfort
GB
-