To take a photo, press and hold the Shutter button [6] for about 2 seconds, until you
hear a "beep" sound. The number of pictures you took is shown on the LCD screen.
Note: make sure there is a reasonable level of lighting when taking photos. If there
is not enough light, you will hear a "double beep" sound indicating the picture hasn't
been taken.
Deleting the last picture taken
Press the
button [3] to select the lower trash can icon as
shown on the LCD screen. Press the Shutter button [6] within 5
seconds to delete the last picture taken. You will hear a "beep"
sound each time you delete a picture.
Deleting all files
Press the
button [3] twice to select the upper trash can
icon as shown on the LCD screen. Press the Shutter button [6]
within 5 seconds to delete all the pictures stored in the camera.
Note: if you press the
operation.
Continuous Picture Shots
This mode allows you to take a succession of quick shots which the camera will
save as short video clips in AVI format.
Press and hold the HI/LO/
Keep the Shutter button [6] pressed to take several photos continuously and
automatically.
1. Connect the camera to your computer via the USB
cable provided. You will hear a small beep sound and the
LCD screen will turn on when the camera is connected to
your PC.
TAKING PHOTOS
DELETING FILES
button by mistake, just wait 5 seconds to cancel this
button [4] to select the
DOWNLOADING YOUR PHOTOS
icon on the LCD screen.
13