ENGLISH
Specifications:
• 20 cm (8") Bass-Speakers
• 180 Watt RMS / 300 Watt MAX.
• Impedance 2 Ohms
• Frequency Response 30 - 300 Hz
• SPL 88 dB @ 1W/1m
• 50 mm (2") Voice Coil
• Glass Fiber Cone, Nomex Spider
• Mounting Depth: 31 mm
• Mounting Diameter: 192 mm
Important Notes:
•
Please treat all parts of the sound system and the components of your vehicle with caution.
•
Follow under all circumstance the regulations of the vehicle manufacturer and do not make
any modifications on the vehicle, which could interfere the driving safety.
•
Always ensure the correct polarity of all connections.
Legal Note:
•
ESX or Audio Design GmbH is in no way affiliated with the Bayerische Motoren Werke AG or any
of its subsidiaries or affiliated companies connected to, or is acting on its behalf or with its authorization.
•
All registered product names, trade marks and brands are the property of their respective owners.
•
The compatibility with the specified types of vehicles reflects the information available on January 2017.
•
Technical changes and errors reserved.
Customer Service:
In general, the assembly and installation of the sound system should be made by a trained and technically skilled specialists. If you nonetheless choose the
self-assembly and you have any problems, contact your specialist dealer or the Audio Design Service Department under Tel. +49 7253 - 94 65 93 or by E-Mail
to speakers@audiodesign.de
Installation:
To install the subwoofers, the front seats have to be removed, which are
secured with 4 screws. Loosen these screws and then remove the stan-
dard speaker grille. Then replace the original loudspeakers with the new
ESX subwoofers.
2
Compatibility:
BMW E 60/61/70/71/81/82/83/84/87/88/89/90/91/92/93
BMW F 01/02/03/04/06/10/11/12/13/20/21/22/25/30/31/32
To ensure a optimal and a free movement stroke of the speaker, you may
need to remove a portion of the foam. Set then the speaker cover back to
its location, and re-tighten the screws of the seat, but please take care that
these are tight.