LEXIBOOK Barbie DJ200BB Guia Del Usuario página 12

INSTALLING AN OPTIONAL MEMORY CARD
Your Barbie Digital Camera has a built-in SDRAM memory of 32MB.
You may also insert an SD card (not included) to increase the memory
size of the camera. To do so, push the SD card firmly into the slot until
you hear a "click" sound. Please refer to image D located at the back of
the cover page.
The icon will be displayed after inserting an SD card and powering
the unit on.
INSTALLING THE CAMERA DRIVER AND SOFTWARE
Follow these instructions to install the camera driver and application
software on your PC system.
1. Insert the CD Software (included) in your CD-ROM drive. The CD
will auto run, and the installation menu will appear. Click on "Install
Driver", and then follow the instructions to install it. You will need to
reboot your computer after the driver installation.
Note: If the CD does not auto run, click Start ‡ Run, type in
"D:"autorun.exe" in the Run dialog text box (where D:\ is your CD-ROM
drive).
2. Proceed similarly to install the PhotoImpression and
VideoImpression software. These software offer many photo and video
applications.
Notes:
- You must install the driver before downloading files from the camera.
- Do not connect the video camera to your PC during the software
installation.
- You can click on "Browse CD" to read the user guides of the Photo-
Impression and VideoImpression software. If you cannot read the files,
you will have to install Acrobat Reader first.
12
Press the P
Press and h
camera OF
Note: The c
1. Turn the
mode. The
2. Hold the
3. Press the
video clip is
4. Press the
1. Turn the
mode. The
Otherwise,
2. Hold the
3. Press the
1. Turn the
mode. The
2. The num
left side of t
3. Press the
Press the d