Alcad 912 Serie Manual De Usuario página 35

However, the possibility does exist of saving and loading the logical channel arrangement (LCN).
To save an LCN fi le (with the extension .ord):
1. Generate the NIT table of the installation.
2. Press the MENU key on the screen in which the channels are shown.
3. Select the option Save services number to fi le.
4. Select the directory where you wish to save the LCN fi le.
To load an LCN (.ord) fi le saved in memory:
1. Generate the NIT table of the installation.
2. Press the MENU key on the screen in which the channels are shown.
3. Select the option Load services number from fi le.
4. Select the directory in which the desired fi le is located.
Once all the modules of an installation have been confi gured and the NIT table generated with the desired
logical channel order, send the newly-generated NIT table to each module of the installation. To do this:
1. On the screen showing the channels of the installation, press OK.
2. A message will appear telling you that the NIT table is being calculated.
3. Set the IR communication switch of the corresponding module to ON.
4. When the calculation of the NIT table is completed, press the T key.
5. A message will confi rm that the NIT table has been correctly sent to the module.
6. Set the IR communication switch of the module to OFF.
For the remaining modules of the installation, repeat the above instructions from 3 to the 6 as many times
as necessary.
PS-011 MANUAL
PS-011 MANUAL
63%
Channel numbering (LCN)
1 ALCAD TV
FRW TELEVISION
2
Services number from file
iTELE SAT
3
Load services number from file
>Save services number to file
4
SPORT TV ENGLAND
NExT
5
CANAL 14
6
5-3-2011 16:19:45
PAG. 35
ENG