Fisherbrand Precision Serie Manual De Instrucciones página 14

12
3. Press Yes, and PUt.ref (put the reference weight) will
display.
4. Place the reference sample on the pan to display the weight.
When the reading is stable, the * appears.
5. Press the
sample is stored in memory. The display will show 100%.
6. Remove the reference sample, and place the test object on
the pan. The ratio of the test object to the reference sample
weight is displayed as a percentage.
7. To view the reference sample weight or the percentage of the
test object weight to the reference sample weight, press the
button.
8. To establish a new reference sample weight, long press the
button and repeat the steps described above.
Item Settings
Note: If the reference weight of last Percent Weighing operation
needs to be kept, press No when the message Clr.ref (Clear
reference) displays.
Printing Setup:
Changing printing setup. See Section 7 for more information.
button so that the weight of the reference
Fisherbrand TM Precision & Analytical Series