Adjusting The Tone; Muting The Sound; Switching The Display's Brightness; Listening With Headphones - Denon RCD-M38 Manual Del Usuario

Ocultar thumbs Ver también para RCD-M38:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ENGLISH
Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control
Button only on the main unit
Button only on the remote control
<8/-, +/9>
<PHONES>
SOURCE
[DIMMER]
[NUMBER]
[PROG/DIRECT]
SOURCE
[CD 1/3]
[2]
[VOLUME
df
]
SDB/TONE
[TIME/DISPLAY]
12
Operations possible during playback

Adjusting the tone

BUTTON
1
Use
SDB/TONE
<BUTTON>
adjusted.
[BUTTON]
SDB
<BAND/2>
<SOURCE
2
Adjust the volume with
<1/3>
DIRECT>
9]
or
• To make other tone adjustments at this time, press
TONE
.
• If no operation is performed for 5 seconds, the adjustment is
retained and the normal display reappears.
SDB
Emphasizes the bass sound when the Super Dynamic
Bass (SDB) function is set to ON.
[Selectable modes]
BASS
Adjusts the bass sound.
[Variable range]
SDB/TONE
TREBLE
Adjusts the treble sound.
<VOLUME>
[Variable range]
Adjusts the left/right volume balance.
BALANCE
[Variable range]
S.DIRECT
Plays back a disc using the SOURCE DIRECT mode.
During the SOURCE DIRECT mode, the audio signals
bypass the tone control circuits (SDB/BASS/TREBLE/
BALANCE), the music reproduction is more faithful to
[CLEAR/DEL]
the original sound.
[REPEAT]
[RANDOM]
Settings made upon purchase:
[6, 7]
• SDB .......................................OFF
• BASS ..................................... 0dB
[8, 9]
• TREBLE ................................. 0dB
• BALANCE .......................CENTER
• S.DIRECT ..............................OFF
[MUTE]
• When "SDB" is ON, you can adjust "BASS".
• This can also be set using
[o p]
to select the tone parameter to be
BASS
TREBLE
S. DIRECT
BALANCE
,
,
<8/–
+/9>
[8
[o p]
.
ON
OFF
–10dB
+10dB
–10dB
+10dB
L06
CENTER
R06
<SOURCE DIRECT>
.

Muting the sound

Press
.
[MUTE]
"MUTE ON" is displayed.
To cancel, press
[MUTE]
again.
,
(The mute mode is also canceled when the
[VOLUME
df
]
turned or a
is pressed.)
SDB/

Switching the display's brightness

Press
.
[DIMMER]
100 %
Off
• The display's brightness switches each time the button is pressed.

Listening with headphones

Plug the headphones (sold separately) into the
.
<PHONES>
• The sound from the speakers is automatically cut off.
NOTE
To prevent hearing loss, do not raise the volume level excessively
when using headphones.
<VOLUME>
control is
70 %
40 %

Publicidad

Tabla de contenido
loading

Tabla de contenido