Safety Message To Installers - Federal Signal Corporation SST-MV Instrucciones De Instalación

INSTALLATION INSTRUCTIONS FOR FEDERAL MODEL SST-MV
A. General.
The Federal Model SST-MV is a solid-state signalling device that can be used for general pur-
pose signalling. Any one of four distinctive signalling tones may be selected by the installation
of the J4 or J5 plugs in the appropriate positions. The tone can easily be changed if the signal-
ling requirements change. The Model SST-MV can be installed either indoors or outdoors. The
SST-MV is listed at Underwriters Laboratories, File E4813
(Category UCST) Contl. #558H. The SST-MV is also cUL listed.
B. Specifications.
Operating Voltage
Operating current
Sound Output
Wail
Yelp
Horn
Temporal Slow Whoop
Weight (approx.)
Dimensions (HWD)
C. Unpacking.
After unpacking the unit, examine it carefully for damage that may have occurred in transit. If
the equipment has been damaged, file a claim immediately with the carrier, stating the extent
of the damage. Before proceeding, ensure that the parts listed in the KIT CONTENTS LIST
have been supplied.
D. Kit Contents List.
Quantity
1
1
1
E. Installation.
People's lives depend on safe installation of our products. It is important to follow all
instructions shipped with the products. This device is to be installed by a trained electrician
who is thoroughly familiar with the National Electrical Code and will follow the NEC Guide-
lines as well as local codes.
The selection of the mounting location for the device, its controls and the routing of the wiring
is to be accomplished under the direction of the Facilities Engineer and the Safety engineer. In
addition, listed below are some other important safety instructions and
precautions you should follow:
• Read and understand all instructions before installing or operating this equipment.
SELECTABLE SIRENTONE-MULTI VOLT
Description
Adapter
Gasket, Adapter
Connector Plug, 4-Position

SAFETY MESSAGE TO INSTALLERS

120/240VAC 50-60Hz, 24VDC
Voltage
120VAC
240VAC
24VDC
dB(A) @ 10'
on Axis
109.5
111
107
110.5
4.4 lbs. (2.173Kg)
14.5" x 12" x 9"
-1-
Current
210MA
120MA
600MA
dB(A)
UL Rating
100
100
94
Part Number
K8476121A-04
K8476122A
K140340B