Maintenance And Cleaning - Sinmag Europe SM 716F Manual De Instrucciones

6. TROUBLE SHOOTING
6.1. Humidity is not enough
Heater is damaged
> Replace
Too munch scale in the tank
> Wash
6.2. Fermentation is not uniform
Fan is damaged
> Replace
6.3. Temperature is not enough
Heater is burnt out
> Replace
6.4. Noisy
Fan is bad
> Replace
6.5. Lighting not good
Lighting tube is bad/ Starter is bad
> Replace
If you have any doubt, please contact our local dealer.

7. MAINTENANCE AND CLEANING

• Turn off main switch and clean the proofer inside and outside
after daily use.
• Clean the proofer inside and outside.
• Clean water tank monthly.
SINMAG EUROPE BVBA
ENG
5