SBS TEWOOLBRAIDG Manual De Instrucciones página 5

WASHING
WARNING: hand wash only
Remove the electronics parts before washing:
1. The control panel A is held in a pocket between a double
layer inside the band
2. Turn the control panel A by 90° the gently easy it out from
the opening at the rear of the band
3. Repeat the same moves for the addiction speaker located
at the opposite side of the band
Replace the electronics after washing:
1. With the control panel A turned on its side, gently insert into
the band 's control side through the rear opening
2. Insert the control panel A into the pocket with control patch,
then turn the control panel to align buttons and LED light
with the control panel
3. I nsert the additional speaker B into the opposite side of the
head band through the rear opening
4. Insert the additional speaker B into the speaker pocket,
then adjust the speaker and wire to make that the wire is
not visible outside of the rear opening.
5