User Manual - SBS TEEARSETBT300TWSK Manual De Instrucciones

UK

USER MANUAL

Recharging from base
Use a USB charger cable inserted into the micro-USB port and then
connected to a computer or a travel battery charger.
The charger LED on the base flashes Red while charging and becomes
solid Red when the base has reached full charge.
Recharging from earphones
Place both earphones in the relevant charging receptacles on the base
and press the charge button once --> the Blue LED on the charger base
will light up.
The charging lights on the earphones will be red during charging and
will turn off once the earphones are fully charged.
Powering on and pairing both earphones together
- Hold down the button on both earphones at the same time until the
LEDs on both earphones flash alternately Red/Blue.
- Wait a few seconds for the earphones to recognise and pair with each
other --> now they will flash slowly in Blue only.
- Activate Bluetooth on mobile phone --> the pair of earphones will be
identified as a single device, find and select SBS BT300 TWS.
NB:
If the phone has already been connected with just one of the two
earphones, activate the phone's Bluetooth and unpair the single
earphone already displaying as "paired" and then deactivate Bluetooth
on that phone.
Powering on and pairing a single earphone (left or right)
- Hold down the button for 4 seconds until the earphone LED flashes
alternately red/blue.
- Activate Bluetooth on mobile phone --> find and select SBS BT300
TWS.
Operating the earphones
When the earphones are used as a pair, the functions described below
will be activated just using the button on one of the two earphones.
Answer a call: quick-press the button once.
4
End a call: quick-press the button once.
Reject a call: hold down the button for 2 seconds.
Redial the most recently dialled number: quick-press the button twice.
Play / Pause: quick-press the button once.
Powering off
Hold down the button on both earphones (if being used as a pair) or on
the single earphone --> the Red light will come on for just 1 second and
then the earphones will power off.
Safety precautions
- Read, follow and save these instructions, paying attention to all
warnings.
- Stop using the product immediately if it causes discomfort or pain.
During use it is recommended to keep the volume at a level that is not
harmful to your ears and allows you to hear noises around you. Don't
have the volume up high!
- Store the appliance away from heat, moisture and dust.
- Do not use abrasive detergents to clean the earphones.
- Do not use near water devices (faucets, fountains, swimming pools,
washing machines, etc.) and do not allow the earphones to come into
contact with sharp objects.
- Keep away from WIFI, router or other high frequency transmission
equipment to prevent interruption of signal reception.
- Using the earphones while driving can distract you and increase the
likelihood of accidents.
- Battery life may vary depending on mode of use.
- Use within its range of activity (10m), preferably free from obstacles
along the route of connection to the connected device.
- Keep out of reach of children.
5