Installing/ Removing The Battery Pack - Kenwood TK-D240 Guia Del Usuario

INSTALLING/ REMOVING THE BATTERY PACK

The battery pack is not charged at the factory; charge it before
use.
CAUTION
◆ Do not short the battery terminals or dispose of the battery by
fire.
◆ Never attempt to remove the casing from the battery pack.
1 Align the battery pack with
the back of the transceiver,
then press the battery pack
and transceiver firmly together
until the release latch on the
base of the transceiver locks.
2 To remove the battery pack, lift
the safety catch on the base
of the transceiver, then press
the release latch underneath
the safety catch.
3 While pressing the release
latch, pull the battery pack
away from the transceiver.
13