Sennheiser evolution wireless Serie Operación Manual página 62

64
Inserting and changing the battery
Unscrew the display section
Slide back the display section
becomes fully accessible.
Insert the 9 V PP3 battery (IEC 6 LR 61). Please observe correct polarity
when inserting the battery.
Push the the battery compartment into the radiomicrophone's body.
Screw the display section tight.
To change the battery, press out the battery from below (press in the
direction of the arrow).
Switching the transmitter on/off
¸
Turn the protective cap
that the
Press the
LED lights up.
To switch the transmitter off, press the
appears on the display. You can then release the button. The red LED
goes off.
Muting the transmitter
Use the MUTE
switch does not switch off the
´
by turning it counter-clockwise.
´
²
at the bottom of the radiomicrophone so
ON/OFF button becomes accessible.
¸
ON/OFF button to switch the transmitter on. The red
switch to noiselessly mute the transmitter's audio signal (this
transmitter).
until the battery compartment
ON/OFF button until "OFF"
¿