PC Locs LocknCharge FUYL Tower Instrucciones Para El Usuario página 9

Once this process is performed, the ongoing state of the lockers will be determined at the moment that
power is returned. Lockers that were manually opened and left open when the power is returned will be
unlocked (a breach alarm will need to be cleared). Lockers that are closed and left closed when the power is
returned will not lose their state – they will continue to be locked as if they were never opened.
For example if:
• Locker #5 is locked
• The power is removed
• The manual override is used to open locker #5
• If power is returned with the door #5 open, a locker breach alarm will occur. Use admin keypad
override mode to remove the alarm, then the locker is ready for use.
• Alternatively, if the door #5 is reclosed before the power returns, then locker #5 will still be locked,
with the same PIN as before.
MANAGEMENT PORTAL
The FUYL Tower can be administrated over a wired local network, or by directly connecting to the FUYL
Tower using an Ethernet cable. This is performed using a browser (Firefox, Explorer, Chrome, Safari).
Offsite administration is not supported.
There is a separate user guide for the portal which covers the setup process and instructions for use. Please
refer to the FUYL Tower Management Portal User Guide.
INSTRUCTION MANUAL
Insert the release lever into the cabinet as
shown.
Firmly press up on the lever to release all the
doors.
Firmly press down on the lever to reset the
release latch.
Remove the lever, then close and lock the control
door.