Control Pad Features - Kenmore 790.4045 Manual De Uso

Horno de pared
Ocultar thumbs Ver también para 790.4045:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Control Pad Features

Note: The appearance of your oven control may differ slightly from the one illustrated below. However, all
functions are the same. Also, push buttons or pads may be shaped differently than those appearing in this Use
and Care Guide.
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become
familiar with the various functions of the oven as described below.
CLOCK SET
COOK TIME PAD
PAD—Used
Used to enter
to set the
the length of the
time of day.
baking time.
TIMER SET/OFF
PAD—Used to set
or cancel the minute
timer. The minute
timer does not start
or stop cooking.
Also, TImEr SET/
OFF Pad is used to
set the Continuous
Bake Feature.
DELAY START
PAD—Used to
set the desired
start time for
OVEN, PREHEAT & DOOR LOCK LIGHTS* The "Oven" light
baking. May be
will glow each time the oven unit turns on to maintain the
used with COOK
set oven temperature. The "Preheat" light will glow when
TImE to program
the oven is first set to operate, or if the desired temperature
a delayed bake
is reset higher than the actual oven temperature. The "Door
cycle.
Locked" light will flash until the door locks when the self-
clean cycle is in use. It glows constantly after the door locks.
*Note: The OVEN indicator light on the electronic display will turn ON and OFF when using the Bake feature
and during preheat. This is normal and indicates that the oven is cycling to maintain the selected baking
temperature. When the preheat indicator light turns OFF, your oven is ready.
For a silent control panel
When choosing a function, a beep will be heard each time a pad is pressed. If desired, the control can be
programmed for silent operation. Press and hold
the controls from sounding when a pad is pressed. To return the sound, press and hold
until the control beeps once.
Note: The control will return to the audible mode after a power outage.
Temperature conversion
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be
programmed for any temperature from 170°F to 550°F (77°C to 287°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1. Press
. "— —" appears in the display.
2. Press and hold the
3. Press and hold
4. Press the
or
5. Press any control pad to return to normal operating mode.
UP and DOWN ARROWS PADS Used
along with the function pads to select
oven temperature, cook time, start time
(when programming an automatic
start time), time of day, clean time and
minute timer.
until "HI" appears in the display.
until °F or °C appears in the display.
to change °F to °C or °C to °F.
. After 7 seconds, the control will beep once. This will block
7
BAKE
FEATURE
PAD—Used
INDICATOR
LIGHTS— These
to select
the bake
light to show
function.
which feature is
in use.
BROIL PAD—
Used to select
the variable
broil function.
SELECT CLEAN
PAD—Used to
select the Self-
Cleaning cycle.
A 2 or 3 hours
Self-Clean time
may be selected.
STOP PAD— Used to clear
any function previously
entered except the time of
day and minute timer. Press
STOP to stop cooking. Also
the STOP pad is used to
activate oven lockout setting.
again for 7 seconds

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido