Routine Maintenance Instructions - DOSMATIC TurboDos 100 Manual De Operación

Routine Maintenance Instructions

Step 1.
Unscrew LOWER END
CYLINDER ASSEMBLY
from body.
Step 4 for (1% & 0.5%)
Squeeze tabs and remove dosage
piston.
Step 5a for
(TD200 0.13%) Remove and
replace #51 LOWER SHAFT
ASSEMBLY.
Step 2.
Remove LOWER END
CYLINDER ASSEMBLY .
Step 4a for
(TD100 - 1% & TD200 - 0.5%)
Replace #44 DOSAGE PISTON flared-
end up and #14 O-ring.
Step 6.
Reinsert #52 SHAFT ASSEMBLY into
body and rotate 90º to lock. Insert
#51 into UPPER SHAFT ASSEMBLY
for TD100 0.5%, 0.25% and TD200
0.25% & 0.13% Confirm the shaft
is locked in by gently tugging on the
shaft. Shaft should remain inserted.
↓
Step 3.
Rotate #52 SHAFT 90º and pull
from body.
Step 5 for
(TD100 - 0.25%, 0.5% & TD200
0.25%) Remove #51 LOWER
SHAFT assembly and replace #44
DOSAGE PISTON and #14 O-ring.
Step 7.
Screw LOWER END CYLINDER
ASSEMBLY onto body. Ensure
#16 gasket is seated on the top
of cylinder assembly.
English: 13