Publicidad
INDEX
A.
Assembly instructions
Assembly
Connection
Applications
Environmental limitations
B.
Switching on
Checks before switching on
C.
Instructions
D. Safety measures
E.
Maintenance
F.
Exploding (Annex)
G. Technical characteristics.
H. Declaration of conformity with CE regulations
A. ASSEMBLY INSTRUCTIONS
Thank you for purchasing our vertical light lamp. In constructing it, we have made every
effort to use our knowledge and expertise to create a high technology and high quality
product that will surely satisfy your every need.
Assembly
When unpacking the vertical light lamp, check that none of the pieces are damaged or
broken. If you find any that are, replace them with original spares. If these are electric
components, exchange them for homologated items bearing the same reference. In case
of doubt, check with the manufacturer.
Connection
Check that the tension and frequency of the vertical light lamp, shown in the
characteristics panel, are the same as those of the network. (fig.1)
The auxiliary socket can connect:
-Other vertical light maps in parallel.
-Tools, such as a drill or vacuum cleaner. The maximum power that can be
connected is 16 Amps.
When transporting, roll up the power cable. Never pull the cable to move the machine.
Applications
Use: The vertical light lamp can be used for professional, domestic and leisure purposes,
both for indoor lighting and for outdoor use in workplaces, garages, gardens, etc.
It can also be used as a signal on roads and paths. If perimeter lighting is needed for this
application, the reflector should be removed.
See examples of this application. (Pag. 18,19)
Environmental limitations
The vertical light lamp is designed for outdoor use, and is dust and rain resistant (IP-44).
B. SWITCHING ON
Checks before switching on
Before using the vertical light lamp, check that none of the pieces are worn or broken; if
any are, they should immediately be repaired or replaced.
Check that the tension and frequency of the network are the same as those shown on
the lamp's characteristics panel.
The socket must include an earth connection and protection against electrical discharge
(Differential of 300 mA for vertical use and 30 mA for domestic use).
C. INSTRUCTIONS
1.- The vertical light lamp can be used for several purposes, depending on the
combination of uses of the lamp with respect to the spherical base.
2.- The lamp and the base are independent elements.
3.- It comes with a plug, which can be used for connection to different elements. (fig. 2)
- Lamps in parallel.
- Portable electric tools for performing different tasks.
4.- Base: Should be filled with sand to create the right counter-weight, guaranteeing
that it returns to the original position, (max angle LV-18 60º, LV-36 45º). (fig. 3, 4)
5.- Lamp: This provides fluorescent light with rapid illumination.
6.- Can be connected to the base, to provide a lamp that is stable against climatic
effects, etc. (fig. 5)
7.- Can stand on the floor in a vertical position, on the floor in a horizontal position, or
be hung to a wall.
8.- The vertical light lamp is turned on by plugging it into a socket. (fig. 6)
Without the previous authorisation of GERMANS BOADA S.A., the partial or total reproduction of this manual, in any format or by any means or process, is strictly prohibited, whether such reproduction be mechanical,
photographic or electronic.
Any of these activities will incur legal liability and may give rise to penal action being taken.
GERMANS BOADA S. A. reserves the right to make any technical modification without previous notice.
ENGLISH
D. SAFETY MEASURES
1.- Carefully read these instructions before using this product and keep them safe.
2.- This lamp meets the requirements of Directives 73/23 CEE and 93/68 CEE for the
safety of electric products and Directives 89/336CEE, 92/31/CEE and 93/68/CEE
for Electromagnetic compatibility.
3.- Unplug the appliance before any maintenance tasks.Use only with a differential with
FI protection connector.
4.- Do not use the lamp in the presence of liquids or inflammable gasses.
5.- Do not allow anybody, especially children, to touch the lamp and extendible cables.
6.- Store the lamp when it is not being used in a dry, enclosed place, out of reach of
children.
7.- Avoid physical contact with surfaces which are framed or connected to earth.
8.- This vertical light lamp will provide better, safer performance if used only for the
task for which it has been designated.
9.- Never tug at the cable in order to disconnect the machine. Keep the cable away
from heat, oil and sharp edges.
10.- Stand firmly on the floor and be careful at all times not to lose your balance.
11.- The use of any accessory or complement other than those recommended in this
instruction manual may be hazardous.
12.- This electric tool complies with the pertinent safety requirements. Repairs should
only be made by qualified staff using original replacement parts. Otherwise, the
user risks considerable injury.
E. MAINTENANCE
Cleaning and maintenance
Changing the fluorescent tube:
1.- Lift the tube protector (fig. 7) by hand.
2.- Remove the screws (A) in (fig. 8) using a PH0 screwdriver.
3.- Lift the metal cap along with the lamp socket (fig.9). Take care with the lamp-socket
connection.
4.- Throw the old fluorescent tube away and replace it with a new one. (fig.10)
5.- Assemble by following the process in reverse.
Removing the interior reflector:
1.- Follow steps 1, 2 and 3 of the previous section.
2.- Pull the reflector away with your hand until it separates from the tube.
3.- Assemble by following the process in reverse.
To conserve the lamp better, we recommend cleaning the lamp with a damp cloth after
use.
Do not use dissolvents, gasolines or ketones to clean the vertical lamp.
Note: Dispense of the used fluorescent tube in special containers in accordance with
current waste disposal regulations.
F. EXPLODING
See annex
-4-
Publicidad
