Tv Operation; Starting Setup - Sansui HDLCD1955B Manual De Instrucciones

Starting setup

The Starting Setup menu appears the first time
you turn on the TV, and assists you to select the
menu language, specify the Air/Cable setting,
and program your channels automatically.
IMPORTANT: Make sure that the antenna or cable
TV system connection is made!
1
To turn on the TV, press POWER (POWER
indicator on the front of the unit changes green.
It may take approx. 10 seconds for a picture to
appear on screen.). The starting setup function
begins. Press ENTER. Press
your desired language.
Auto Setup OSD Language
Please select your language: English
Español
Français
2
Press or ENTER, then press
"Air" or "Cable".
3
Press or ENTER, then press
"Scan".
If you select "Skip Scan," the Starting Setup stops
and changes to the normal screen.
4
Press or ENTER, now the "Auto Setup" starts.
After the starting setup is completed, press
ENTER or RETURN to exit Auto Setup menu.
• Depending on the reception condition, it may
take from 15 minutes to 30 minutes to complete
memorizing digital cable channels. Please be patient.
NOTE:
• Press to return to the previous step.
• If you press RETURN in the process of "Auto
Setup", the Starting Setup stops and changes to the
normal screen.
• When you make a menu selection, your changes
occur immediately. You do not have to press
RETURN to see your changes.
• When you are finished programming the menus,
press ENTER.

TV operation

1
To turn on the TV, press POWER.
(POWER indicator on the front of the unit
changes green. It may take approx. 10 seconds
for a picture to appear on screen.)
2
Adjust the volume level by pressing VOL + or .
The volume level will be indicated on the screen
by blue bars. As the volume level increases, so do
the number of bars. If the volume decreases, the
number of blue bars also decreases.
3
Set the Signal Type option to the appropriate
position (see "Air/Cable selection" on page 19).
4
Press the Direct Channel Selection (0 9, )
buttons to select the channel.
(If you press only channel number, channel
selection will be delayed for a few seconds.)
TO SELECT ANALOG CHANNELS
1-9:
10-99:
100-135: Press the 3 digits in order. Example, to
TO SELECT DIGITAL CHANNELS
Press the first 3 digits, then press the button,
followed by the remaining number.
Example, to select channel 15-1, press 1, 5, , 1,
then press ENTER.
CHANNEL LIST
or to select
The Channel List shows a list of all receivable
programs.
Press ENTER to display the Channel List.
Press
Press ENTER to display the selected channel.
If you press ENTER again, the Channel Details
that you selected now will appear.
•
or to select
•
or to select
•
•
•
VHF/UHF/CABLE CHANNELS
UHF
14-69
NOTE:
• If a channel with no broadcast is selected, the
sound will automatically be muted.
• It may take a few seconds for a digital channel
picture to appear on screen after being selected.
To select the video input source
To view a signal from another device connected to
your LCD TV, such as a VCR player, press INPUT
SELECT, then press
can select TV, Video, Component or PC depending on
which input jacks you used to connect your devices.
Input Select
TV
Video
Component
PC
Press 1-9 as needed. Example, to select
channel 2, press 2, then press ENTER.
Press the 2 digits in order. Example,
to select channel 12, press 1, 2, then
press ENTER.
select channel 120, press 1, 2, 0, then
press ENTER.
or to select the desired channel.
If a channel is selected with only audio content,
" Audio only " will be displayed on the screen.
If a channel is selected with a weak digital
signal, "Digital channel signal strength is low"
will be displayed on the screen.
The same program may be available on either
an analog channel or a digital channel. You may
choose to watch either format.
If a channel is selected to which you have not
subscribed, "Scrambled" will be displayed on
the screen.
If a station being viewed stop broadcasting and
the TV is not operated, the TV will automatically
shut itself off after 15 minutes.
Channels not listed under the Channel List
cannot be changed using the Direct Channel
Selection (0 9, ) buttons.
Air
VHF
2-13
STD/HRC/IRC
14-36
37-59
60-85
86-94
95-99
100-135
01
/ , then press ENTER. You
Cable
VHF
2-13
(A) (W)
(AA) (WW)
(AAA) (ZZZ)
(86) (94)
(A-5) (A-1)
(100) (135)
(4A)
15