Operation - Festo DGCI Serie Instrucciones De Utilizacion

DGCI−...
3. Tighten the locking nut K of the stop bolt or shock absorber with the following
tightening torque.
DGCI−...
Tightening torque
Fig. 27
7

Operation

Warning
Uncontrolled fast moving parts can cause
injury to people in the vicinity of the DGCI.
S Make sure that:
nobody can place his/her hand in the path
of the moving parts (e.g. by providing a
protective grill)
there are no objects within the positioning
path.
It should not be possible to touch the
DGCI until the mass has come to a
complete stand.
If the work stroke is modified:
make sure that the work stroke remains within the permitted limits:
S
(è Commissioning under Accurate adjustment of the stroke").
If the work load or dynamics are modified:
check whether other cushioning elements are required on the SPC200/CMAX
S
(è Commissioning the DGCI or è Manuals for the controller).
Festo DGCI−... 0612NH English
18
[Nm] 5
25 32
20 20
Fig. 28
40
35
39