Safety Regulations - OP CF 1 Manual De Uso

OP S.r.l.
25131 BRESCIA - Via Serpente, 97 - Tel. 030/3580401 - Fax 030/3580838
_________________________________________________________________________

SAFETY REGULATIONS

1. Always make sure that the machine is placed on a stable, safe surface and that it is
not causing vibrations that, in addition to being bothersome and useless, may cause
malfunctions.
2. Leave enough room in the work zone.
3. The manufacturer accepts no responsibility for any damage caused by negligence.
4. NEVER USE the equipment before reading the user manual and
5. CAUTION ! If improperly used, the equipment may be dangerous
6. Filtering operations are safe provided the regulations given below are
complied with.
7. CAUTION ! It is absolutely essential that all working operations are carried out
one operator only
8. Never attempt to use the machine above the permitted working pressures; this might
cause serious danger to the operator
9. This manual must be given to the operator and kept. The proprietor of the
equipment is responsible for it.
responsibilities.
11.
11. Before connecting to the mains, check that there is adequate protection from
overloads and short circuits ( a protection is advisable also from excessive
undervoltage).
12. Check that the mains voltage and frequency are as indicated on the machine
nameplate.
13. Never use
regulations ; keep the power supply lead outside the working zone.
14. Always disconnect the power supply during maintenance, which must be carried out
by specialized staff.
15. Make sure that filtering operations are always carried out in conditions of safety.
UNDERSTANDING ITS CONTENTS
and may cause injury to parts of the body, which must never come
within the range of moving parts.
10. Guards must never be removed or tampered with.
wires, extension leads or plugs not in accordance with the CEI
16. Use gloves and adequate personal protection.
.
Ensure that the operator is aware of his
33
E
N
G
L
I
S
H
by