Tuner Function Menu; Storing The Strongest Broadcast Stations; Selecting Stations From The Preset; S Electing Stations From The Preset Channel List - Pioneer DEH-P9450MP Manual De Operación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Recalling broadcast stations
1. Press NEXT to display "1" – "6".
Press NEXT until "1" – "6" appears.
2. Press any of the buttons 1 – 6 to recall a
station preset under that button.
Note:
• You can also use 5 or ∞ to recall broadcast sta-
tions memorized in the buttons 1 – 6.
T
uner function menu
The tuner function menu has the following func-
tions:
Note:
• If you do not operate the function within about 30
seconds, the display is automatically returned.
S
toring the strongest broadcast
stations
BSM (best stations memory) lets you automati-
cally store the six strongest broadcast stations
under the buttons 1 – 6.
1. Press FUNC to select the BSM mode.
2. Press BSM to turn the BSM on.
"Searching" appears. The six strongest
broadcast stations will be stored under the
buttons 1 – 6 and in order of their signal
strength.
When finished, "Searching" disappears and
the display switches to the preset channel
list mode.
• To cancel the storage process before it is
completed, press BSM again while
"Searching" appears.
3. Press any of the buttons 1 – 6 to recall
the desired station.
S
electing stations from the pre-
set channel list
The preset channel list lets you see the list of
preset stations and select one of them to
receive.
1. Press FUNC and then press chLIST to
select the preset channel list mode.
2. Press any of the buttons 1 – 6 to recall
the desired station.
Note:
• You can also use 2, 3 and 5 to select and recall
the desired station.
T
uning in strong signals
Local seek tuning lets you tune in only those
broadcast stations with sufficiently strong sig-
nals for good reception.
1. Press FUNC and then press LOC to
select the local mode.
2. Press LOC to set the local seek sensitivi-
ty.
Press LOC repeatedly to switch between the
following settings:
Local OFF = Level 1 = Level 2
FM:
= Level 3 = Level 4
Local OFF = Level 1 = Level 2
AM:
• When the local mode is exited except for
"Local OFF" is selected, "LOC" appears on
the basic display.
Note:
• The "Level 4" setting allows reception of only the
strongest stations, while lower settings let you
receive progressively weaker stations.
14

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido