Assembly Instructions; Handle - Kenmore 116.31200 Manual De Uso Y Cuidado

Please pay special attention to these hazard alert boxes, and follow any instruc-
tions given. WARNING statements alert you to such hazards as fire, electric
shock, burns and personal injury. CAUTION statements alert you to such hazards
as personal injury and/or property damage.
WARNING
Electrical Shock Hazard
DO NOT plug into the electrical supply
until the assembly is complete. Failure
to do so could result in electrical shock
or injury.
CAUTION
Do not overtighten.
Overtightening could strip the screw
holes.
Do not operate the vacuum cleaner with-
out the screw in place.
1. Remove the handle screw from the
body of the vacuum cleaner.
2. Position the handle assembly as shown
in the illustration. Insert handle screw.
3. Using a Phillips screwdriver, tighten
handle screw.
NOTE: It may be necessary to adjust the
handle slightly.

ASSEMBLY INSTRUCTIONS

HANDLE

- 7 -
efore assembling the vacuum cleaner,
B
check the PACKING LIST. (Page 3) Use this
list to verify that you have received all the
components of your new Kenmore
vacuum cleaner.
Hose
Holder
Handle
Screw
Hole
Handle
Screw